- 50 -
Recording
Taking Pictures Using the Built-in Flash
Applicable modes:
∫To open/close the flash
•Be careful not to catch a finger when closing a flash bulb.
•Be sure to close the flash when not in use.
•The flash setting is fixed to [Œ] while the flash is closed.
•Be sure to keep the flash clean, clear of dust and avoid exposure to anything sticky. This may cause
the flash to stick and not open.
•You cannot close the flash by pushing the microphone or its periphery.
Forcibly closing the flash can damage the camera.
Set the flash to match the recording.
•Open the flash.
1Press 1 [‰].
ATo open the flash
Press [ ].
BTo close the flash
Push the top of the flash cover until it clicks.