Manuals / Brands / Photography / Camcorder / Panasonic / Photography / Camcorder

Panasonic AG-HPG10P, F0707K0 -M, VQT1H84 Basic operations, 1 2 , 3

1 92

Download 92 pages, 3.98 Mb

16

Basic operations

Hold down [POWER] for at least 2 seconds.

The power lamp lights, and the power is turned on.

When [POWER] has been held down for more than 2 seconds while the power is on, the power lamp will

go off, and the power will be turned off.

Turning the power on and off

1 Hold down [POWER] for at least 2 seconds to turn the power on.

2 Raise the LCD monitor while pressing the LCD monitor open button in the direction shown by

the arrow.

AG-HPG10

AG-HPG10

3 Set the LCD screen to the angle where it is easiest to see its displays.

AG-HPG10

AG-HPG10

Make sure that the LCD monitor is raised upright before turning it.

Using the LCD monitor

The LCD monitor can be

turned 90 degrees to the

right.

• The monitor cannot

be turned more than

90 degrees. Applying

excessive force beyond

this limit may cause

trouble in the unit.

The LCD monitor can be

turned 180 degrees to

the left.

• The monitor cannot

be turned more than

180 degrees. Applying

excessive force beyond

this limit may cause

trouble in the unit.

180º 90º

Contents

Main AG-HPG10P Operating Instructions ENGLISH Memory Card Portable Recorder Read this first! IMPORTANT CAUTION WARNING: FCC NOTICE (USA) Declaration of Conformity CAUTION: FCC Warning: NOTIFICATION (Canada) For USA-California Only Software information for this product Recommendation for Use of Genuine Panasonic Battery Pack (Rechargeable Battery) IMPORTANT SAFETY INSTRUCTIONS Contents Introduction Name of the parts Preparations Playback Saving data Editing Displays Menu For your reference How to use the unit 1 2 3 4 5 Page Before use Accessories Name of the parts Operation area Mechanism area and input/output connector area Charging the battery Charging 1 2 3 Installing and removing the power supply Insertion Connecting and disconnecting the power cable 1 Removal Basic operations Turning the power on and off 1 2 3 Using the LCD monitor 1 2 3 4 Basic operations (continued) Operation modes Page LCD monitor settings 1 2 4 5 Basic operations (continued) 1 2 4 5 6 P2 cards Inserting P2 cards P2 card access LED and P2 card status 1 2 1 3 P2 card protection 4 Formatting P2 cards 1 2 P2 card recording durations Concerning P2 cards Other Using the USER buttons Charging the internal battery 1 Using SD memory cards Inserting/ejecting SD memory cards 1 2 1 1 2 3 4 5 Thumbnail display Playback formats 11 12 13 14 15 !X P THUMBNAIL OPERATION PROPERTY HDD Thumbnail display (continued) Names and functions of thumbnail display screen parts (continued) w Changing the displays on the thumbnail display screen Thumbnail display (continued) Setting the items to be displayed the item to be set at the lower level of THUMBNAIL SETUP, and press [STILL]. Page Repairing and connecting clips Repairing defective clips 2 4 6 Connecting incomplete clips 2 4 6 Copying clips 2 4 6 Displaying the clip information 2 4 5 1) 2) 3) 4) 5) Playback 6 contents. 7 Editing the clip information 2 4 5 6 7 Page Displaying the P2 card status (continued) 3 4 5 Displaying the SD memory card information Clip playback Playing back clips 2 3 Variable-speed searches 1 2 Clip forward/reverse 1 2 2 3 4 5 6 Deleting text memos 1 2 3 4 Dividing and copying clips using text memos 1 2 3 4 Replacing thumbnail images 1 2 3 4 Page Page Recording data on P2 cards 1394 input recording 1 2 4 1 Waveform monitor displays Copying data from P2 cards to the hard drive Page Types of hard drives and usable functions Page Exporting data to a hard drive in 1-card increments 1 2 3 4 5 7 6 Hard drive data display 1 2 4 Thumbnail displays of clips on the hard drive 1 2 3) 1) 2) 4) Displaying the clip information Page Copying data from P2 cards to the hard drive (1394 HOST mode) Switching to the 1394 HOST mode 1 2 4 1 2 Hard drive status displays 1 2 Editing the P2 card data (USB DEVICE mode/1394 DEVICE mode) Editing by means of external devices Editing in the USB device mode. 1 2 4 10 Editing in the 1394 device mode. 1 2 4 10 Normal displays Screen displays Page Screen displays (continued) Warning displays Page Screen displays (continued) Error displays Selecting what is to be displayed on the screen List of recording/playback and output formats For system format 60 Hz regions Displays [For 50 Hz system format regions] Basic operations on the setting menus 1 2 3 4 5 Setting menu configuration Menus enclosed in the broken-line frames are not displayed in the USB HOST mode. (Page 80) (Pages 72 - 73) (Page 74) (Page 75) (Page 75) List of setting menus RECORDING SETUP screen RECORDING SETUP screen (continued) SW MODE screen PLAYBACK FUNCTIONS screen AV OUT SETUP screen DISPLAY SETUP screen DISPLAY SETUP screen (continued) CARD FUNCTIONS screen OTHER FUNCTIONS screen OTHER FUNCTIONS screen (continued) OPTION MENU screen Troubleshooting (Q&A) For your reference Power-related Q&A Battery-related Q&A Troubleshooting (Q&A) (continued) Recording Editing For your reference Playback Operating precautions Page Updating the drivers installed in the unit Maintenance Condensation Storage precautions Handling the data recorded on P2 cards Concerning the use of memory cards Cards that you can use Cards that you cannot use Specifications