Screen displays (continued)

16Remaining media memory displays The amount of memory remaining on the card in the slot targeted for recording is displayed when “ONE CARD” is selected as the “P2 CARD REMAIN” item setting on the setting menu “DISPLAY SETUP” screen. The target slot can be switched to another slot using “SLOT SEL” assigned to [USER]. When “TOTAL” is selected, the total amount of memory remaining on the two cards is displayed.

17Media information displays

The card slots in which P2 cards have been inserted and the basic information on the slots are displayed.

1

2

Lighted:

 

Recordable P2 card

1

2

Lighted in green:

 

P2 card targeted for recording

1

2

Blinking:

 

Card recognition underway

:

No card inserted

P: Write-protected card F : No more free memory

X : Card cannot be recognized

E : Improperly formatted P2 card (which can be used if it is formatted properly)

18Monitor volume level meter

When [PAGE/AUDIO MON/VAR] is pressed, the level of the volume which is output from the internal speaker and headphone jack is displayed. You can adjust the volume level using the [+] and [–] buttons.

Warning displays

LOW BATTERY

No operation is possible because the battery charge is depleted.

INCOMPATIBLE CARD

The card complies with the different standard and so it cannot be used.

COPY INHIBITED

The input signals are copy-guarded so they cannot be recorded correctly.

DIR ENTRY NG CARD

The card contains folders which are organized illegally. It cannot be used for special types of recording (interval recording, one-shot recording or loop-rec). A warning will be displayed when this P2 card is inserted into a P2 device or when recording has ended.

RUN DOWN CARD

The P2 card has reached the end of its service life. It is recommended that you replace it. Even when a warning appears, it can still be used for recording or playback. However, a warning will be displayed when this P2 card is inserted into a P2 device or when recording has ended.

FORMAT ERR !

The card does not comply with the P2 standard.

<Thumbnail screen>

CANNOT ACCESS!

Data cannot be accessed because of a problem in the content or for some other reason. Restore the media or clips to the normal operating status, and then use the data.

WRITE PROTECTED!

The P2 or SD card is write-protected. Insert a media on which data can be saved.

NO CARD!

The P2 or SD card has not been inserted. Insert a media which is supported.

CARD FULL!

There is no more free memory on the P2 or SD card. Insert a media with free memory.

CANNOT DELETE !

Data cannot be deleted because of a mismatch in the content versions. Ensure that the same content version as the device is used.

CANNOT FORMAT!

The P2 card cannot be formatted because of a problem. Check the P2 card.

CANNOT REPAIR!

The content cannot be repaired because there is nothing wrong with it or because of a similar reason. Check the selected content.

CANNOT RE-CONNECT!

Clips cannot be reconnected because content which is contained on no more than one card has been selected or because of a similar reason. Check the selected content.

NO COPY TO SAME CARD!

Data cannot be copied because the same card is being used for the copy source and copy destination. Copy the data onto a card which does not contain the selected clip.

TOO MANY CLIPS!

Too many clips have been selected. Reduce the number of clips which have been selected.

64

Page 63 Page 65
Page 64
Image 64
Panasonic VQT1H84, F0707K0 -M, AG-HPG10P operating instructions Screen displays
Page 63 Page 65

F0707K0 -M, AG-HPG10P, VQT1H84 specifications

The Panasonic VQT1H84, AG-HPG10P, and F0707K0-M are key components in Panasonic's lineup of professional solutions aimed at videographers and broadcasters. These products reflect Panasonic's commitment to innovation and quality in video capture and playback technologies.

The VQT1H84 is a comprehensive user manual for various Panasonic camcorders and audiovisual equipment. It serves as a crucial reference for users who seek to understand the intricate functionalities of their devices. The manual provides insights into settings, optimal configurations, and troubleshooting guidelines. It contains detailed explanations of key features like control menus, connectivity options, and audio settings. This resource ensures that operators can fully utilize their Panasonic products, enhancing the overall production quality.

The AG-HPG10P is a portable P2 HD portable recorder designed for professional broadcasting and digital cinematography. This compact model supports the P2 card format, allowing seamless integration of high-quality video and audio recording in various production environments. One significant feature is its dual codec capability, enabling the use of both AVC-Intra and MPEG-2 formats, which provides flexibility for different project requirements. The HPG10P also supports HDMI and SDI output, facilitating easy connection to external monitors and other equipment. Its robust design and high-capacity storage options make it ideal for on-location shoots and studio applications alike, ensuring that users can capture and playback detailed HD footage without compromising performance.

The F0707K0-M, on the other hand, typically refers to a specific part or accessory compatible with Panasonic's range of equipment. While details about this item may vary, it often pertains to the technical aspects of connectivity or enhancements in product performance. This could include components like cables, connectors, or supplementary tools designed to enhance the functionality of camcorders or recorders.

In summary, the combination of VQT1H84, AG-HPG10P, and F0707K0-M represents a cohesive ecosystem tailored for modern video production needs. With detailed user guidance, portable recording capabilities, and additional components for improved usability, Panasonic continues to establish itself as a leader in the audiovisual industry. Their commitment to quality and innovation ensures that professionals have the tools necessary to create stunning visual narratives.
Top Page Image Contents