FP2−CCU | Functions of Computer Communication Unit |
1.1 Functions and Features
1.1Functions and Features
1.1.1Functions and Features
The FP2 Computer Communication Unit is designed for use with the FP2/FP2SH progra,mmable controller. It is used as a communication interface that allows data to be read and written between an RS232C device such as a personal computer or display panel, and a CPU unit.
Host computer (Personal computer)
Operation display panel
RS232C
Can be connected to a display panel and computer.
Enables a 1:1 connection to a display panel and computer. No software program is needed for communication.
Economical peer−to−peer communication with a personal computer is possible.
This unit can be directly connected with a personal computer through RS232C to collect and write data from it without building up a large−scale network.
One unit is equipped with two ports.
One unit is equipped with two RS232C interface ports.
No communication program is needed on the PLC. (Computer link function)
The PLC automatically returns responses using the FP series’ MEWTOCOL communication protocol so that there is no need to prepare a communication program at the side of the PLC.
Connection with modem (Only COM. 2)
It is possible to receive data over telephone lines from another PLC, by connecting modem with your PLC. (Receiving only)
1.1.2 | Unit Part No. |
|
|
|
|
|
|
|
|
|
|
Name |
| Part No. |
|
Computer Communication Unit | FP2−CCU |
| |
|
|
|
|
Two D−sub connectors (9−pin) are provided as accessories with the unit.
1 − 3