Panasonic FP2 6.2Table of MEWTOCOL Command

Specifications FP2−CCU

6.2Table of MEWTOCOL Command

6.2Table of MEWTOCOL Command

The following is a table of MEWTOCOL commands that can be used with the FP2 Computer Communication Unit.

6.2.1MEWTOCOL−COM Commands

RCS	Read single point of contact information
WCS	Write single point of contact information
RCP	Read plural points of contact information
WCP	Write plural points of contact information
RCC	Read word unit of contact information
WCC	Write word unit of contact information
SC	Preset word unit in contact area
RD	Read data area
WD	Write data area
SD	Preset of data area
RS	Read timer and counter set value area
WS	Write timer and counter set value area
RK	Read timer and counter elapsed value area
WK	Write timer and counter elapsed value area
MC	Registration and reset of monitor contact
MD	Registration and reset of monitor data
MG	Monitor execution
RR	Read system register
WR	Write system register
RT	Read PLC status
RM	Remote control (RUN/PROGRAM mode switching)
AB	Transmission abort command
LC	Hierarchy control

6 − 4