Connecting with a HDMI mini cable

Select the desired method of HDMI output.

MENU : [SETUP] # [HDMI RESOLUTION] # [AUTO]/[1080p]/[1080i]/[480p]

[AUTO] determines the output resolution automatically based on information from the connected TV.

If the images are not output on the TV when the setting is [AUTO], switch to the method [1080p], [1080i] or [480p] which enables the images to be displayed on your TV. (Please read the operating instructions for the TV.)

Image will not display on TV for a few seconds in the following cases.

jWhen the 1080/60p recording mode is turned on/off during Motion Picture Recording Mode

jWhen you touch the play mode select icon to select [1080/60p], and then touch [ENTER] during Playback Mode.

jWhen the 1080/60p or 1080/60i scenes are switched.

Connecting with the AV multi cable

Select the desired setting of AV multi connector output.

MENU : [SETUP] # [AV MULTI] # desired setting

[COMPONENT]: When connecting to the component terminal

[AV OUT]: When connecting to the video terminal

Changing the component output setting

MENU : [SETUP] # [COMPONENT OUT] # desired setting

[1080i]: When connecting to the component terminal on the TV compatible with 1080i.

(Playback is in high definition quality.)

[480i]: When connecting to the component terminal on the TV compatible with 480i. (Playback is in standard quality.)

Set [VIDEO LIGHT] to [OFF] when recording with the TV connected to the component terminal to confirm the recording. (l 59)

104

VQT3W31

Page 104
Image 104
Panasonic HC-V500M owner manual Connecting with a Hdmi mini cable, Connecting with the AV multi cable, 104