71
VQT3W31
Message is displayed when this unit is moved rapidly.
When “CAMERA PANNING IS TOO FAST.” appears, move the unit slowly while recording.
≥Set to [OFF] to turn off the message indication.
≥Message will not appear while pausing the recording. (Message will appear even if it is
pausing the recording if [DEMO MODE ] is set to [ON].)
This will reduce the wind noise coming into the built-in microphones while maintaining the
realism.
≥Switch to Manual Mode. (l77)
≥This function’s default setting is [ON].
≥When switching to Intelligent Auto Mode, [WIND NOISE CANCELER] is set to [ON], and
the setting cannot be changed.
≥You may not see the full effect depending on the recording conditions.
Directivity of the microphone is synchronized with the zoom operat ion. Sou nds near th e fr ont
of the unit are recorded more clearly if you zoom in (close-up) and surrounding sounds are
recorded more realistically if you zoom out (wide angle).
[SHOOTING GUIDE]: [RECORD SETUP] # [SHOOTING GUIDE] # [ON]
[WIND NOISE CANCELER]: [RECORD SETUP] # [WIND NOISE CANCELER] # [ON]
[ZOOM MIC]: [RECORD SETUP] # [ZOOM MIC] # [ON]
MENU
MENU
MENU
HC-V500&V500M-P&PC&PU-VQT3W31_mst.book 71 ページ 2012年1月16日 月曜日 午前11時21分