Panasonic HC-V500M owner manual About Conversion Assist Function, 121

≥It is possible to play back still pictures on a PC using a image viewer standard to Windows or commercially available image browsing software, and copy still pictures to a PC using Windows Explorer.

≥Please refer to page 132 for details about using a Mac.

Important Notice

≥When using an SDXC Memory Card, check the following support site. http://panasonic.net/avc/sdcard/information/SDXC.html

≥Do not insert a disc recorded in AVCHD format with HD Writer AE 4.0 in a device that does not support the AVCHD format. In some cases the disc may get stuck in the device. The disc will not play back on devices that do not support the AVCHD format.

≥To play back a Blu-ray disc to which you have copied scenes recorded in 1080/ 60p, equipment is required that supports AVCHD Progressive.

≥When inserting a disc containing recorded motion pictures into other devices, a message prompting you to format the disc may be displayed. Do not format the disc, since deleted data cannot be restored later.

≥Data cannot be written into the SD card from a PC via this unit.

≥HC-V500M

It is impossible to write data to the built-in memory on this unit from a PC.

≥Motion pictures that have been recorded on another device cannot be written to the software supplied with this unit. To write motion picture data recorded with the Panasonic High Definition Video Camera sold previously, use the HD Writer supplied with the unit.

≥When motion picture data is written to and read from the SD card, correct operation of the unit cannot be guaranteed if software other than that supplied with the unit is used.

≥Do not start the software supplied with this unit and other software at the same time. Close any other software if you start the software supplied with this unit and close the software supplied with this unit if you start any other software.

∫About Conversion Assist Function

When you want to convert the recording quality and write to media, the “Conversion Assist Function”, which is a linking function between this unit and the HD Writer AE 4.0, is activated by connecting this unit to the PC with the USB cable. When the “Conversion Assist Function” is used, it is possible to write to media faster than when operating only on PC.

≥Please refer to page 128 for details about the connection of this unit and a PC.

≥Refer to the operating instructions of the software for details. (l 131)

121

VQT3W31