Panasonic HC-V500 Optical Image Stabilizer Lock, To make the display of disappear, Touch Shutter

Optical Image Stabilizer Lock

In Motion Picture Recording Mode, you can further improve optical image stabilization

by touching and holding . With this function, you can further reduce the effects of the shake that tends to occur when using zoom.

1Press the Optical Image Stabilizer button to turn the image stabilizer on.

2Touch and hold .

≥ Icon is displayed in the A while you are touching and holding .

≥Optical Image Stabilizer Lock is released when you remove your finger from the icon.

∫To make the display of disappear

Display of		will not disappear even when no operation is performed for specific time with
the setting	at the time of purchase. To make the display of		disappear, change the
setting of the [O.I.S. LOCK DISPLAY].
MENU : [SETUP] # [O.I.S. LOCK DISPLAY] # desired setting

[ON]: Constantly displayed.

[OFF]: The icon will disappear after approx. 5 seconds without any touch operation.

≥Stabilization may not be possible under strong shaking conditions.

≥To record while moving the unit quickly, release Optical Image Stabilizer Lock.

Touch Shutter

It is possible to focus and record a still picture of a subject that is touched.

1	Touch	.
2	Touch the	subject.

≥ Focus area is displayed at the touched position, and a still picture is recorded.

≥Depending on the recording conditions or recognition of the touched position, it may not be possible to record the intended picture.

≥This will not operate for recording yourself.

55

VQT3W31