Panasonic HC-V500 Fade, To select the color for fade in/out, Intelligent Contrast Control

Models: HC-V500 HC-V500M

1 168
Download 168 pages 20.4 Kb
Page 57
Image 57

Fade

When you start recording, the image/audio gradually appears. (Fade in)

When you pause recording, the image/audio gradually disappears. (Fade out)

The Fade setting is canceled when the recording stops.

To select the color for fade in/out

MENU : [RECORD SETUP] # [FADE COLOR] #

[WHITE] or [BLACK]

(Fade in)

(Fade out)

The thumbnails of scenes recorded using fade in become black (or white).

Intelligent Contrast Control

This brightens parts that are in shadow and difficult to see and suppresses white saturation in bright parts at the same time. Both bright and dark parts can be recorded clearly.

If there are extremely dark or bright parts or the brightness is insufficient, the effect may not be clear.

PRE-REC

This prevents you from missing a shot.

This allows recording of the pictures and sound to start approximately 3 seconds before the recording start/stop button is pressed.

PRE-REC appears on the screen.

Aim the unit at the subject beforehand.

There is no beep sound.

PRE-REC is canceled in the following cases. jIf you change the mode

j HC-V500

If you remove the SD card j HC-V500M

If you remove the SD card while [MEDIA SELECT] is set to [VIDEO/SD CARD] jIf you touch MENU

jIf you press the 1080/60p button jIf you turn the unit off

jIf you start recording

jAfter 3 hours have passed

After setting PRE-REC, if recording starts in less than 3 seconds, motion pictures taken 3 seconds before pressing the recording start/stop button cannot be recorded.

57

VQT3W31

Page 57
Image 57
Panasonic HC-V500M owner manual Fade, To select the color for fade in/out, Intelligent Contrast Control, Pre-Rec