Sanyo RL-4920 manual Assigning Speed Dial Numbers, To assign Speed Dial, To use Speed Dial

Assigning Speed Dial Numbers

With this feature you can dial Contacts Directory entries with one key press for locations 2-9. Save your memory locations 2-9 for speed dialing your most commonly used phone numbers. Speed Dial numbers must be stored in your Contacts to use this feature.

To assign Speed Dial:

1.Press to access the main menu.

2.Select Contacts and press .

3.Select Speed Dial #s and press .

4.To select a corresponding speed dial number from 2-9, highlight an unassigned number and press .

5.Select an entry from the list and press .

6.Select the phone number you want to set as a speed dial and press .

– or –

1.Press the navigation key right.

2.Highlight your desired entry by scrolling through the Contacts list and press .

3.Highlight the phone number you want to set as a speed dial and press Options (right softkey).

4.Highlight Set Speed Dial and press .

5.Highlight an unassigned number and press .

When you highlight an assigned number and press , you’ll be asked whether you want to overwrite the assigned number. Select Yes to overwrite or No to cancel.

To cancel a stored speed dial number:

1.Press to access the main menu.

2.Select Contacts and press .

3.Select Speed Dial #s and press .

4.Highlight the stored speed dial number you want to cancel and press .

5.Highlight Unassign and press .

To use Speed Dial:

From standby mode, just press and hold the appropriate key.

Section 2G: Using the Contacts Directory 88