Sanyo RL-4920 manual Changing the Display Font Size of a Message, To adjust the display font size

Lock to lock the message. Locked messages will not be erased automatically. To unlock the message, select Unlock and press .

Font Size to change the font size from Small or Normal.

Save to Ph. Book to save the phone number, email address, and URLs. Select a data category and press to save.

Go to Phone Book to go to the Contacts list (if applicable).

Compose New to compose a new message. (See page 171 to compose a message.)

Erase to erase the message.

Changing the Display Font Size of a Message

After you display a Message (except in the Outbox and Drafts folder), press Options (right softkey) to display message options.

To adjust the display font size:

1.Select Font Size and press .

2.Select Small or Normal and press .

Prepending a Phone Number From a Message

After you display a Message (except in the Outbox and Drafts folder), press Options (right softkey) to display message options.

To add a prefix to a phone number:

1.Select Prepend and press .

2.Highlight your desired phone number and press or OK (left softkey).

3.Enter the digits or pauses (see below) you want to add to the number.

4.Press or Speaker (left softkey) to make a call.

To select another option, press Options (right softkey), highlight it and press .

Call to dial the phone number.

Call:Speaker On to dial the phone number in speakerphone mode.

Save Phone# to store the phone number in your Contacts Directory.

H Hard Pause to insert a hard pause. (See “Dialing and Saving Phone Numbers With Pauses” on page 26.)

T 2-Sec. Pause to insert a 2-second pause. (See “Dialing and Saving Phone Numbers With Pauses” on page 26.)

Section 3B: PCS Vision 175