Sanyo RL-4920 manual Answering Calls, To answer an incoming call

Answering Calls

To answer an incoming call:

1.Make sure your phone is on. (If your phone is off, incoming calls go to voicemail.)

2.Press or Speaker (left softkey) to answer an incoming call. (Depending on your phone’s settings, you may also answer

incoming calls by pressing any number key. See “Setting Any Key Answer” on page 53 for more information.)

Your PCS Vision Phone notifies you of incoming calls in the following ways:

The phone rings or vibrates.

The LED flashes.

The backlight illuminates.

The screen displays an incoming call message.

If available, the phone number of the caller is displayed.

If the phone number is in your Contacts list, the contact’s name is displayed.

The following options are also displayed by pressing Options (right softkey). To select an option, highlight it and press .

Call Guard to answer the call when you are in roaming mode. See page 71 for setting Call Guard.

Answer to answer the call.

Answer:Speaker to answer the call in speakerphone mode.

Don’t Answer to hang up the incoming call and return to the Web while you are in Web operation. (This feature appears only when PCS Vision access is dormant.)

Screen Call to answer the call by using a pre-recorded announcement. (This feature appears only when you are in a PCS Service area or digital roaming area. See page 126.)

Quiet Ringer to mute the ringer. (This feature appears only when the ringer is set.)

Tip: Your PCS Phone offers additional ways to answer calls. (See page 52 for Auto Answer and see page 53 for Any Key Answer.)

Section 2A: Your PCS Vision Phone – The Basics 20