Sanyo RL-4920 manual Making and Answering Calls, Making Calls, To place a call using your keypad

Making and Answering Calls

Making Calls

Placing a call from your PCS Phone is as easy as making a call from any land line phone. Just enter the number and press and you’re on your way to clear calls.

To place a call using your keypad:

1.Make sure your phone is on.

2.Enter a phone number. (If you make a mistake while dialing, press to erase one digit at a time. Press and hold to erase the entire number.)

3.Press or Speaker (left softkey). (To place a call when you are roaming and Call Guard is enabled, see “Controlling Roaming

Charges Using Call Guard” on page 71.)

4.When you’re finished, press to end the call.

Tip: To redial your last outgoing call, press or Speaker (left softkey) twice.

Tip: When making calls off the Sprint Nationwide PCS Network, always dial using 11 digits (1 + area code + phone number).

You can also place calls from your PCS Phone by using PCS Voice CommandSM (page 199), Speed Dialing (page 28), your Call History listings (page 77) and your Contacts directory (page 82).

Important: To maximize performance when using your PCS Phone, extend the antenna before a call and do not touch the antenna during a call (see page 204).

Correct Incorrect

Section 2A: Your PCS Vision Phone – The Basics 18