Sanyo RL-4920 manual Setting Up Screen Call, Activating Screen Call, To set Auto Screen Call

Setting Up Screen Call

This feature enables you to screen incoming calls by using a recorded annoucement, either one that is pre-recorded or one that you record. You can also record the caller’s message into the Call Memo list.

To listen to the message, see “Reviewing Voice Recordings” on page 120.

Activating Screen Call

To start Screen Call when you have incoming calls:

1.When the phone rings or vibrates, press Options (right softkey) to display the options.

2.Highlight Screen Call and press .

To set Auto Screen Call:

1.Press to access the main menu.

2.Select Voice Services and press .

3.Select Screen Call and press .

4.Select Auto and press .

5.Select On and press .

6.Set the answering time by using numeric keys or by pressing the navigation key up or down.

7.Press or OK (left softkey). (The icon is displayed on the standby display.)

Tip: If a new caller’s message is waiting, appears on the display. The memos recorded while activating “Screen Call” are shown with “√” or “!” icon in the Call Memo list (“√”: once played, “!”: not played yet).

Tip: While the caller’s message is being recorded: Pressing stops recording and disconnects the call, pressing answers the call.

Section 2I: Using Your Phone’s Voice Services 126