Panasonic HDC-SD1 Switching the language, Adjusting LCD monitor, For Australia

Setup

To recharge the built-in lithium battery:

If you connect the AC adaptor or insert the battery in this unit, the built-in lithium battery will be recharged. Leave the unit as it is for approx. 24 hours and the battery will save the date and time for approx. 6 months. (The battery is still being recharged even if the mode dial is set to OFF.)

(For Australia)

WARNING

THE LITHIUM BATTERY IN THIS UNIT MUST ONLY BE REPLACED BY QUALIFIED PERSONNEL. IF THIS IS NECESSARY, CONTACT THE PANASONIC CUSTOMER CARE CENTRE ON 132600 FOR YOUR NEAREST AUTHORIZED SERVICE CENTRE.

Switching the language

You can switch the language on the screen display or the menu screen.

1Press the MENU button, then select [LANGUAGE] and press the centre of the cursor button.

2Select [English] and press the centre of the cursor button.

Adjusting LCD monitor

Adjusting the brightness and the colour level of the LCD monitor

1Press the MENU button, then select [SETUP] # [LCD SET] #

[YES] and press the cursor button.

2Move the cursor button up or down to select the item to be adjusted. Then, press the cursor button and move the cursor button left or right to make the adjustment.

The bar display moves.

≥After adjustments are made if no operations are performed for about 2 seconds, the bar will

disappear.

≥Press the MENU button to exit the menu screen.

[BRIGHTNESS]: Brightness of the LCD monitor

[COLOUR]: Colour level of the LCD monitor

≥These settings will not affect the images actually recorded.

36

VQT1A34