Panasonic HDC-TM41P/PC Quick Guide, ∫ Inserting the battery, ∫ Charging the battery,   

Quick Guide

∫Inserting the battery

Install the battery by inserting it in the direction shown in the figure.

AInsert the battery until it clicks and locks.

∫Charging the battery

∫Inserting/removing an SD card







ADC input terminal

1Connect the AC adaptor to the DC input terminal.

2Connect the AC cable to the AC

adaptor, then the AC outlet.

≥The status indicator will flash red at an interval of 2 seconds, indicating that charging has begun.

It will turn off when the charging is completed.

Access lamp [ACCESS] A

≥When this unit is accessing the SD card or built-in memory, the access lamp lights up.

1)Open the LCD monitor.

≥Check that the access lamp has gone off.

2)Open the SD card cover and insert (remove) the SD card into (from) the

card slot B.

≥Face the label side C in the direction shown in the illustration and press it straight in as far as it will go.

≥Press the center of the SD card and then

pull it straight out.

3)Securely close the SD card cover. ≥ Securely close it until it clicks.

13

VQT3J95