Panasonic HDC-TM41P/PC Start playback on this unit, You can dub by connecting an AV multi cable

Start recording on the connected device.

Dubbing in standard picture quality

∫Dubbing using equipment without an SD card slot or a USB terminal,

or using a video device

You can dub by connecting an AV multi cable.

≥Images are dubbed in standard quality.

≥Use the AC adaptor to free you from worrying about the battery running down.

AV MULTI

Change the video input on the video device and TV that this unit is connected to.

≥The channel set will differ depending on the

	terminal to which the unit is connected.
	≥ See the operating instructions of the video
	device for details.

≥Insert the plugs as far as they will go.

≥Do not use any other AV multi cables except

the supplied one.

AAV multi cable (supplied)

1 Connect this unit to a video device and then change the mode to

.

≥If the unit is connected to a video device using an AV multi cable, the screen of the unit will not display images when in play back mode. Check on the TV screen instead.

2 Start playback on this unit.

3

≥To stop recording (dubbing), stop playback on this unit after stopping recording on the recorder.

≥If the date and time display and function indication are not wanted, cancel them before dubbing. (l41)

If the dubbed images are played back on a wide-screen TV, the images may be stretched vertically.

In this case, refer to the operating instruction for the device you are connecting to or read the operating instructions of the wide-screen TV and set the aspect ratio to 16:9.

85

VQT3J95