Panasonic HDC-TM90P/PC Copying between SD card and Built-in Memory, Change the mode to, 104

[HDC-TM90]

Copy/Dubbing

Copying between SD card and Built-in Memory

Motion pictures or still pictures recorded with this unit can be copied between an SD card inserted in this unit and a built-in memory.

∫Check the used space of the copy destination

It is possible to check the used space of the SD card or built-in memory by [MEDIA STATUS] (l 46).

≥By displaying in 1 scene or pressing and holding the thumbnail in the 20 scenes or 9 scenes display, recording date and time can be checked when playing back motion pictures, and recording date and file number when playing back still pictures.

≥Depending on the media condition, some remaining capacity of the SD card or built-in memory may not be used.

≥If the remaining capacity on a single SD card is not enough, you can copy to multiple SD cards following the instruction on the screen. In this case, the last scene copied to an SD card is automatically divided to fit the space on the SD card.

≥If you divide the scenes (l 90), and copy by scene selection, it is possible to copy matching the remaining capacity of the media, or only the necessary parts.

Copying

≥If there is not much remaining capacity in the SD card, a confirmation message asking to copy after deleting all data on the SD card is displayed. Be aware that deleted data cannot be restored.

≥Refer to page 105 for approximate time for copying.

1 Change the mode to .

≥Use a sufficiently charged battery or the AC adaptor.

2 Select the menu.

MENU : [COPY]

[ ] When copying from the built-in memory to the SD card

[ ] When copying from the SD card to the built-in memory

[] This will convert and copy the scenes recorded as 1080/60p scenes in the built-in memory to the SD card as normal scenes.

≥When there are relay recorded scenes in the built-in memory, a message appears on the screen. Touch [YES] and copy after combining relay recorded scenes to the SD card. (l 94)

104

VQT3J56