20
VQT3J56
Charging the battery
Important:
≥Use the supplied AC adaptor. Do not use the AC adaptor of another device.
≥Do not use the AC cable with any other equipment as it is designed only for this unit.
Also, do not use the AC cable from other equipment with this unit.
≥The battery can also be charged using a battery charger (VW-BC10PP; optional).
≥The battery will not be charged if the unit is turned on.
≥It is recommended to charge the battery in a temperature between 10°C to 30 °C
(50 °F to 86 °F). (The battery temperature should also be the same.)
ADC input terminal
≥Insert the plugs as far as they will go.
1Connect the AC adaptor to the DC input terminal.
≥Be careful not to pinch the DC input terminal cover.
2Connect the AC cable to the AC adaptor, then the AC outlet.
≥The status indicator will flash red at an interval of 2 seconds, indicating that charging has
begun.
It will turn off when the charging is completed.
∫Connecting to the AC outlet
It is possible to use this unit with power supplied from the AC outlet by t urning on th e unit with
the AC adaptor connected.
≥If the status indicator flashes at a particularly fast or slow r ate, refer to page 145.
≥We recommend using Panasonic batteries (l11, 21, 15 5).
≥If you use other batteries, we cannot guarantee the quality of this product.
≥Do not heat or expose to flame.
≥Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period
of time with doors and windows closed.
When this unit is purchased, the battery is not charged. Charge the battery fully
before using this unit for the first time.
HDC-SD90&TM90-P-VQT3J56_mst.book 20 ページ ２０１１年１月１３日 木曜日 午前９時１８分