4 Adjust the 3D Conversion Lens attachment part following the instructions on the screen.

2 screens will appear.

5 Touch [EXIT] to end the adjustment.

After adjustment, a single screen appears.

When re-attaching the 3D Conversion Lens or after an impact etc., it is recommended that you perform the adjustment again.

6 Press the recording start/stop button to start recording.

A

3D 0h00m00s

HGR 1h20m

3D appears.

Start recording after removing the Lens front cap.

When the 3D Conversion Lens is attached, the zoom position is fixed, and the zoom operation is disabled.

When recording in 3D, the image will appear with gray frame around it. The gray frame will be recorded in the video.

To ensure that the 3D video can be safely viewed, pay attention to the following points when recording.

Where possible, record with the unit in a horizontal state.

Do not get too close to the subject. (record from a distance of at least 1.2 m (3.9 feet).)

When moving the unit as you record, move it slowly.

Try to hold the unit as steady as possible when recording while riding in a vehicle or walking.

Use of a tripod is recommended for recording with a stable picture.

[ECONOMY] will not work while you adjust the 3D Conversion Lens attachment position.

When the 3D Conversion Lens is attached, the auto slow shutter setting is [AUTO SLOW SHTR (3D)]. The default setting of [AUTO SLOW SHTR (3D)] is [ON]. (l 65)

While 3D recording if moving the unit fast, the message is more likely to appear.

If the unit is turned on in the shade, etc., the screen may appear to be blue. In such a case, removing the lens cap will return the screen to normal.

78

VQT3J56

Page 78
Image 78
Panasonic HDC-TM90P/PC, HDC-SD90P/PC owner manual Touch Exit to end the adjustment, ≥ 2 screens will appear