About status indicator during charging

When the status indicator is flashing at a particularly fast or slow rate, the following should be considered.

Flashing with approx. 4 second period (off for approx. 2 seconds, on for approx.

2 seconds):

When the battery is over discharged or the temperature of the battery is too high or low. It can be charged, but it may take a few hours to complete the charging normally.

It will flash in 2 second intervals when normal charging resumes. Even in such cases, it may start flashing in 4 second intervals until charging is completed depending on the conditions of use.

Flashing with approx. 0.5 second period (off for approx. 0.25 second, on for approx. 0.25 second):

The battery is not charged. Remove the battery from the unit, and try charging again.

Check that the terminals of the unit or battery are not dirty or covered with a foreign object, and connect the battery correctly once again. If a foreign object or dirt is present, turn off the unit before removing.

The battery or environment is at an extremely high or low temperature. Wait until the temperature has returned to an appropriate level and try charging again. If you are still unable to charge, there may be a fault in the unit, battery or AC adaptor.

Off:

Charging has finished.

If the status indicator stays off despite the charging being unfinished, there may be a fault in the unit, battery or AC adaptor.

Refer to page 143 for details on the battery.

About 3D

About 3D recording

Attach the 3D Conversion Lens securely. It must not be used with an insecure attachment.

Do not use the 3D Conversion Lens without adjusting it first.

It will not be possible to record 3D video correctly, and this may lead to tiredness or discomfort.

When you re-attach the 3D Conversion Lens after removing it, we recommend making the adjustments again.

With the 3D Conversion Lens attached, do not record a subject at less than the minimum focus distance.

The 3D effects may be more pronounced, and therefore cause tiredness or discomfort.

The minimum focus distance is approx. 1.2 m (3.9 feet).

When recording with the 3D Conversion Lens attached, be careful not to shake the unit.

Tiredness or discomfort may result if the shake is pronounced, due to riding in a vehicle or walking etc.

When moving the unit as you record, move it slowly.

We recommend using a tripod.

About 3D viewing

Anyone who is hyper sensitive to light, suffers from heart disease or is otherwise unwell should avoid viewing 3D video.

Doing may have an adverse affect on such medical conditions.

If you feel tired, uncomfortable or otherwise strange when viewing 3D video, stop viewing at once.

Continuing to view may cause illness.

Please rest appropriately after stopping the viewing.

145

VQT3J56

Page 145
Image 145
Panasonic HDC-SD90P/PC About status indicator during charging, About 3D About 3D recording, About 3D viewing, 145, Seconds