Highlight Playback

Part that was recognized as clearly recorded is extracted from a long recording, and it can be

played back in a short time with effects and music added.

 

Highlight playback cannot be used for iFrame

 

scenes.

 

 

1 Touch

. (l 26)

ALL

 

2 (Only when you would like to change the settings)

Touch [SET] to select the item to change.

[SCENE SETUP]: Select the scene or date to be played back.

[PRIORITY SETUP]: Select the target to give priority to play back. (l 86)

[PLAYBACK TIME]: Select the time to play back. (l 86)

[EFFECT SETUP]: Select the effect for playback. (l 86)

[MUSIC SELECT]: Select the music to be played on playback. (l 87)

3 Touch [START].

When the [SCENE SETUP] is not changed in step 2, it will play back with the last recorded date.

4 Select the playback operation. (l 36, 80)

When the playback is finished or stopped, the screen to select [REPLAY], [SELECT AGAIN] or [EXIT] is displayed. Touch the desired item.

Playing back of all the scenes returns if the unit is turned off or the mode is changed.

Slow-motion playback, frame-by-frame playback, and direct playback bar operation are not possible.

Scene setting

1Touch [SELECT SCENES] or [SELECT DATE].

2(When [SELECT SCENES] is selected)

Touch the scenes to be played back.

≥ Up to 99 scenes can be selected in succession.

When touched, the scene is selected and is

displayed. Touch the scene again to cancel the operation.

(When [SELECT DATE] is selected)

Touch the date to be played back.

A maximum of 7 days can be selected.

When touched, the date is selected and surrounded by red. Touch the date again to cancel the operation.

3 Touch [Enter]/[ENTER].

85

VQT3J56

Page 85
Image 85
Panasonic HDC-SD90P/PC owner manual Highlight Playback, Touch SET to select the item to change, Touch Start, Scene setting