20
English
FZ709E
TUNER OPTION
Radio Data System Operations
Radio Data System Adjustment mode

Radio Data System function

You need to enter the TUNER OPTION to per-
form the Radio Data System function.
1 . During Tuner mode, touch the [ ] key to
switch to ADJ menu.
2 . Select “OPTION” in the menu to enter
TUNER OPTION mode.
3 . Slide along [ ] slider or touch [ ]/[ ]
key, the TUNER OPTION mode changed
as following order:
“P.CH MEMORY” (“PTY”
“PTY SELECT” “AF” “REG”)
“LANGUAGE” “PRESET SCAN”
“AUTO STORE” “P.CH MEMORY”...
Notes:
Item in bracket (PTY, PTY SELECT, AF, REG)
are called Radio Data System Adjustment
mode.
“PTY SELECT” only available when “PTY” is
on.
“REG” only available when “AF” is on.
ON
“PTY” in the display lights and PTY standby
mode is turned on. When the selected
PTY broadcast starts, the PTY item name
appears in the display.
PTY
This function enables you to listen to a broadcast
of the selected programme type even if the unit is
on a Function mode other than radio.
∗ Some countries do not yet have PTY broadcast.
∗ In the TA standby mode, a TP station has priority
over a PTY broadcast station.
∗ The factory default setting is “OFF”.
3 - 1 . Select “PTY”.
3 - 2 . Touch [ ] key to enter detail setting stage.
3 - 3 . Slide along [ ] slider or touch [ ]/[ ]
key to select “ON” or “OFF”.
3 - 4 . After completing settings, touch the [ENT]
key to return to the 1st selected item.
OFF
“PTY” in the display goes off and PTY
standby mode is cancelled.
Cancelling a PTY interrupt broadcast
Touch the [ ] key during the PTY interrupt
broadcast, the PTY interrupt is cancelled
and the unit returns to PTY standby mode.
Selecting PTY
3 - 1 . Select “PTY SELECT”.
3 - 2 . Touch [ ] key to enter detail setting stage.
3 - 3 . Slide along [ ] slider or touch [ ]/[ ]
key to select the desired PTY.

Volume setting of TA, emergency

broadcast (ALARM) and PTY

The volume for TA, ALARM and PTY interrupts
can be set during TA, ALARM or PTY interrupt.
∗ The factory default setting for this volume is “VOL
15”.
During a TA, ALARM or PTY interrupt, slide the
[ ] slider to set the volume to the desired level
(0 to 33).
∗ When the TA, ALARM or PTY interrupt ends, the
volume returns to the level it had before the inter-
rupt.