Bluetooth® Operations
PASS KEY
User can set new 4 digits of pass key that range from 0 to 9 for pairing authentication security. This new pass key will be used for subsequent pairing mode with other Bluetooth® device.
∗The factory default setting is “1234”.
1 - 1 . Select “PASS KEY”.
1 - 2 . Touch the [ ] key to enter detail setting stage.
Default pass key is displayed. Touch [ENT] key to change the setting.
1 | - 4 | . Touch [ ] or [ | ] key to move the cursor. |
1 | - 5 | . Slide along [ | ] slider or touch [ ]/[ ] |
|
| key to select the desired digits. | |
Touch [ENT] key for 2 seconds to store in memory.
“MEMORY” is displayed.
Note:
Both Bluetooth® device and this unit must have the same pass key in order for pairing to be success- ful.
ADDRESS
This will hold the unique Bluetooth® address. The address is 12 figures.
1 - 1 . Select “ADDRESS”.
1 - 2 . Touch the [ ] key, the Bluetooth® address appears in the display.
BT NAME
This will hold the unit's name for pairing pur- pose.
1 - 1 . Select “BT NAME”.
1 - 2 . Touch the [ ] key, the unit's name appears in the display.
VERSION
This will display the software version of the Bluetooth®.
1 - 1 . Select “VERSION”.
1 - 2 . Touch the [ ] key, the Bluetooth® version appears in the display.
Common Operations
Security code
This unit can deter theft by checking registered security code if security code is registered. The security code is registered in the Adjustment mode “CODE” item.
For first time installation, no security code is re- quired.
If security code is registered, changing or discon- necting the vehicle battery will cause the security code input to be requested for activation. “INPUT 0000” will be displayed and “0000” is blinking.
1. Slide along [
] slider or touch [ ]/[ ] key to choose 1~6 to input the security code.
∗ After input first digit, “0000” will stop blinking.
2.Touch [
] key to go on with the next digit.
3.Touch [ ] key to confirm during finish input the 4 security code.
4.Successful password input will power ON the unit.
!CAUTION
If entered code is wrong,
for a given period during which no operation can be performed. After the locking peroid, "INPUT 0000" will be displayed again. For mistakes less than 7 times, the locking time will be 15 seconds; from 7th time onwards, the locking time will be 15 minutes.
English
FZ709E 35
