48
Setup (PC)
1Start Windows 95/98/Me/2000 and
close all other applications.
You must be logged in as an
administrator in Windows 2000.
2Insert the included CD-ROM into your
CD-ROM drive.
The [Choose Setup Language]
dialog box will appear.
Select the desired language that you
want to use with this software from
the drop-down list. Click [OK].
The installation will automatically
start.
If the [Choose Setup Language]
dialog box does not appear:
The installation will automatically
start.
If the installation does not start
automatically:
Click [Start]. Choose [Run...]. Type
d:\setup” (where “d:” is the drive letter
of your CD-ROM drive). Click [OK].
(If you are not sure what the drive
letter is for your CD-ROM drive, use
Windows Explorer and look for the
CD-ROM drive.)
The installation will start.
The following dialog box will appear.
Click [Cancel] to close it.
The screens shown in these
instructions are from Windows Me.
The screens may differ slightly from
those of the actual product.
The screens are subject to change
for improvement without notice.

Installing Multi-Function Station software

!
To uninstall the software
1. Click [Start].
2. Point to [Settings], then click [Control Panel].
3. Double-click [Add/Remove Programs].
4. Select [Panasonic Multi-Function Station]
from the list.
5. Click [Add/Remove
...
] (Windows 95/98/Me) /
[Change/Remove] (Windows 2000), then
follow the instructions on the screen.
3Follow the instructions on the screen
until all files have been installed.
Readiris OCR software can also be
installed. For details about OCR
software, see page 53.
If the fax machine is not connected to
your computer, the [Port Selection]
dialog box will appear. Select the port
number which you want to use. If the
fax machine is connected to your
computer, the port number will be
automatically detected.
Note:
There is also a different way to install
Multi-Function Station software. See the
attached leaflet for PCsetup for details.