Features Summary
55
The unit provides various programming features. Program the desired settings by referring to the
programming tables (p. 56–60).
1Press p.
Display:
2Select the feature you wish to program.
For basic features (p. 56, 57):
Press (or )until the desired
feature is displayed.
For advanced features (p. 58–60):
Press (or )until the following is
displayed:
then press wand press (or )until
the desired feature is displayed.
The current setting of the feature will be
displayed.
3Press +or -until the desired setting is
displayed.
This step may be slightly different
depending on the feature.
4Press w.
The setting you selected is set, and the
next feature will be displayed.
5To exit programming, press p.
ADVANCED MODE
PRESS SET
SYSTEM SET UP
PRESS NAVI.[IH]
Programming by entering the program code
number directly
You can select a feature by directly entering the
program code (# and 2-digit number) instead of using
(or )in step 2.
1. Press p.
2. Press #and the 2-digit code number.
3. Follow steps 3 to 5 above.
See programming tables for code numbers
(p. 56–60).

Programming!

SET
MENU

General programming method

To cancel programming
Press pto exit the program.