79
Specifications

Technical data about this product!

Applicable lines: Public Switched Telephone Network
Document size: Max. 216 mm (812
"
) in width / Max. 600 mm (2358
"
) in length
Effective scanning width: 208 mm (8316
"
)
Effective printing width: 208 mm (8316
"
)
Transmission time*: Approx. 4 s/page (ECM-MMR Memory transmission)**
Scanning density: Horizontal:11.8 pels/mm (300 pels/inch)
Vertical: 3.9 lines/mm (100 lines/inch) –STANDARD
11.8 lines/mm (300 lines/inch) –FINE/SUPER FINE/PHOTO
Halftone level: 64-level
Scanner type: Contact Image Sensor (CIS)
Printer type: Laser Beam Printer
Data compression system:
Modified Huffman (MH), Modified READ (MR),
Modified Modified READ (MMR)
Modem speed: 33,600 / 31,200 / 28,800 / 26,400 / 24,000 /21,600 / 19,200 / 16,800 /
14,400 / 12,000 / 9,600 / 7,200 / 4,800 / 2,400 bps;
Automatic Fallback
Operating environment: 10 °C – 32.5 °C (50 °F – 90.5 °F), 20% – 80% RH (Relative Humidity)
Dimensions (H x W x D): 217 mm x 443 mm x 461 mm (81732
"
x 17716
"
x 18532
"
)
Mass (Weight): Approx. 9.2 kg(20.3 lb.)
Power consumption: Standby: Approx. 6 W
Transmission: Approx. 15 W
Reception: Approx. 230 W
Copy: Approx. 230 W
Maximum: Approx. 560 W (When the fuser unit turns on
)
Power supply: 120 V AC, 60 Hz
Memory capacity: Approx. 150 pages of memory transmission/reception
(Based on the ITU-T No. 1 Test Chart in standard resolution.)
Laser diode properties: Laser output: Max. 5 mW
Wave length: 760 nm – 800 nm
Emission duration: Continuous
Print speed: 10 ppm (pages per minute)
Printing resolution: 600 x 600 dpi
** Transmission speed depends upon the contents of the pages,
resolution, telephone line conditions and capability of the other party’s
machine.
** Transmission speed is based upon the ITU-TNo. 1 Test Chart and
original mode.
If the capability of the other party’s machine is inferior to your unit, the
transmission time may be longer.

ITU-T No. 1 Test Chart

Note:
Any details given in these instructions are subject to change without
notice.
The pictures and illustrations in these instructions may vary slightly
from the actual product.