2. Preparation
19
Document Requirements
2.4 Setting the original

2.4.1 Using the scanner glass

1Open the document cover (1).
2Place the document FACE DOWN on the scanner
glass (2), aligning the top left of the document with
the corner to which the m mark points.
3Close the document cover.
Note:
LConfirm that there are no documents in the auto
document feeder (KX-MB772 only).
LPlace the original onto the scanner glass gently and
do not press down too firmly to avoid malfunction.
LIf the original is a thick book, do not close the
document cover.
LCheck that ink, paste or correction fluid has dried
completely.
LEffective scanning area is as follows:
Effective scanning area
LShaded area will be scanned.

2.4.2 Using the auto document feeder (KX-

MB772 only)

1Insert the document (up to 20 pages) FACE UP into
the feeder until a single beep is heard.
2Adjust the width of the document guides (1) to fit
the actual size of the document.
Note:
LConfirm that there are no documents on the scanner
glass.
LCheck that ink, paste or correction fluid has dried
completely.
LRemove clips, staples or other fasteners.
LDo not set the following types of documents: (Make a
copy of the document using the scanner glass and
set the copy instead.)
Chemically treated paper such as carbon or
carbonless duplicating paper
Electrostatically charged paper
Badly curled, creased or torn paper
Paper with a coated surface
Paper with printing on the opposite side that can
be seen through the other side, such as
newsprint
LThe total height of the documents when laid flat,
must be less than 4 mm. If the documents exceed the
capacity of the auto document feeder, they may fall or
cause a jam in the feeder (KX-MB772 only).
LTo set a document with a width of less than 210 mm,
we recommend using the scanner glass to copy the
original document onto A4 or letter-sized paper, then
setting the copied document (KX-MB772 only).
LDo not set documents that do not satisfy the
requirements of size and weight. Make a copy of the
document using the scanner glass and set the copy
(KX-MB772 only).
LAvailable document size, document weight and
effective scanning area are as follows:
1
2

208 mm

287

mm

5 mm 5 mm

4 mm

4 mm

1