2. Preparation
21
Volume
2.6 Adjusting volume (KX-MB772 only)
Important:
LBefore adjusting volume, set the operation mode
to fax mode. If the {FAX} light is OFF, turn it ON
by pressing {FAX}.
Ringer volume
While the unit is idle, press {V} or {^}.
LIf there are any documents in the document
entrance, you cannot adjust the volume. Confirm that
there are no documents in the entrance.
To turn the ringer OFF
Press {V} repeatedly to display “RINGER OFF= OK?”.
i {SET}
LThe unit will not ring.
LTo turn the ringer back ON, press {^}.
Ringer pattern
LYou can select one of 3 ringer patterns (feature #161
on page 55).
Monitor volume
While using the monitor, press {V} or {^}.
Initial Programming
2.7 Date and time (KX-MB772 only)
1{MENU} i {#}{1}{0}{1} i {SET}
D:|01/M:01/Y:07
TIME: 00:00
2Enter the current date/month/year/hour/minute by
selecting 2 digits for each. Press {*} repeatedly to
select “AM” or “PM”, or 24-hour time entry.
Example: 10 August, 2007 10:15 PM (12 hour
clock format)
1. Press {1}{0} {0}{8} {0}{7} {1}{0} {1}{5}.
D:|10/M:08/Y:07
TIME: 10:15
2. Press {*} repeatedly to select “PM”.
3{SET}
4Press {MENU} to exit.
Note:
LThe other party’s fax machine will print the date and
time on the top of each page you send according to
your unit’s date and time setting.
LAfter setting the date and time, if the unit is in the
copy mode, change it to the fax mode by pressing
{FAX}. You can check your unit’s date and time
setting on the display.
To correct a mistake
Press {<} or {>} to move the cursor to the incorrect
number, and make the correction.
If you have subscribed to a Caller ID service
If feature #114 is set to “NEW ZEALAND”, the date and
time will be automatically set according to the received
caller information.
LIf the time has not previously been set, Caller ID will
not adjust the clock.
{V}{^}{SET}
{FAX}
{<}{>}{SET}{FAX}
{MENU}