6. Fax (KX-MB772 only)
44
Note:
LTo stop receiving, see page 64.
LTo receive fax documents using the extension
telephone, make sure remote fax activation is turned
ON (feature #434 on page 59) beforehand. The
default setting is ON.
6.8.2 Activating TEL/FAX mode
Important:
LNot available when “NEW ZEALAND” is selected in
feature #114 on page 54.
1Make sure feature #404 is set to “TEL/FAX”
beforehand (page 57).
2Press {FAX AUTO ANSWER} repeatedly to display
“TEL/FAX MODE”.
LThe {FAX AUTO ANSWER} light turns OFF.
3The ringer volume setting should be ON (page 21).
How phone calls and faxes are received
1. “INCOMING CALL” will be displayed but the unit will
not ring.
2. The unit will wait for the duration of 2 rings before
answering the call.
LThe number of rings is determined by the
“TEL/FAX delayed ring setting” (feature #212
on page 57).
LDuring this time, an extension telephone will ring.
3. The unit will answer the call and try to detect a fax
calling tone.
When a fax calling tone is detected
The unit receives the fax automatically without
ringing.
When a fax calling tone is not detected
A The unit will ring 3 times. You may answer the call.
LThe number of rings is determined by the “Silent
fax recognition ring setting” (feature #436 on
page 59).
LCallers will hear a ring back tone different from
the one generated by the telephone company.
LWhen you answer the call using an extension
telephone connected to the [EXT] jack, press
{STOP} on the unit to talk to the calling party.
B If you do not answer the call, the unit will activate
the fax function.
LSome fax machines do not generate fax calling
tones when sending faxes, therefore the unit will
try to receive a fax even if no fax calling tone is
detected.