11.Insert the paper support into the slot of the
extension plate (A) until it stops.
A
12.If the ON LINE indicator is not lit, press
ON LINE
to get ready to print.
Single Sheets and Envelopes(Friction Mode)
1. A Turn the power on.
The PAPER OUT indicator will flash indicating that
no paper is installed in the printer.
B Adjust the head gap lever for the thickness
of paper you are using.
Position Used for
1 or 2 Thinner sheets
3, 4, 5 and 6 Thick sheets or envelopes
A
B
HEAD GAP
2. Set the paper feed selector (A) to the " "
position.
A
22 Operating Instructions
Setup