5. Raise the tractor covers (A).
A
6. Place the paper with the printed side face down
and align the paper sprocket holes (B) with the
tractor pins (C), then close the tractor cover
(A).
A
B
C
7. A Adjust the tractors (A) to remove any slack.
B Lock the tractor clamping levers (B).
B
B
A
A
B
B
A
A
A
B
Note
•Make sure the paper is straight.
8. Press
LOAD/PARK
.
This will load the paper to the first print line.
9. Raise the top cover (A).
This is done by inserting the side pins of the top
cover into the slots in the upper cabinet.
A
10.Raise the paper support (A).
A
Operating Instructions 21
Setup