Using the Control Panel

Selecting a Character Font

This printer contains resident fonts which are
accessible through the Control Panel. You can select
any one of the character fonts by pressing the FONT
switch on the Control Panel.
n Press
FONT
.
The combination of FONT indicators (A) indicates the
current character font selected, as shown on the Control
Panel.
A
PROGRAM Courier
Roman Sans Serif
Prestige Script
= light is lit. = light is out. = light is blinking.
Note
•You must be in PROGRAM (both FONT
indicators are off) to allow your software to
control your font selection.

Selecting a Character Pitch

This printer contains resident pitches which are
accessible through the Control Panel. You can select
any one of the character pitches by pressing the PITCH
switch on the Control Panel.
n Press
PITCH
.
The combination of PITCH indicators (A) indicates the
current character pitch selected, as shown on the
Control Panel.
A
PROGRAM 10 CPI
12 CPI 15 CPI
17 CPI
= light is lit. = light is out. = light is blinking.
Note
•You must be in PROGRAM (both PITCH
indicators are off) to allow your software to
control your pitch selection.
28 Operating Instructions
Using the Control Panel
Using the Control Panel