3. Raise the top cover (A).
This is done by inserting the side pins of the top
cover into the slots in the upper cabinet.
A
4. Raise the paper support (A).
A
Note
•lf the extension plate is already installed
(Page 22), it does not need to be removed.
5. A Separate the paper guides to the approximate
width of your paper or envelope.
Note
•To predetermine your left most print
position, move the left paper guide until it
clicks into place.
B Insert a sheet of paper through the paper
guides (A).
The paper will be automatically loaded to the first
print line.
B
A
A
Note
•You can disable Auto load through the
Control Panel Software program
(Page 25) or by using the Control Panel
(Page 33).
•If Auto load is disabled, you must press
LOAD/PARK
to load paper.
•If you need to align the paper horizontally or
vertically, set the paper feed selector to
" ". This releases the paper and allows the
paper to be positioned manually as
required. Set the selector back to " "
before printing.
6. If the ON LINE indicator is not lit, press
ON LINE
to get ready to print.
Operating Instructions 23
Setup