Paper Specifications
Paper which may be used with this unit must be within the specifications provided below.

Fanfold Paper

Width: 102–254 mm (4–10 in.)
Quality and number of sheets:
Type of paper Sheets
Weight
in lbs in g/m²
Fine-quality paper 1 16–24 60–90
Non-carbon 2–5 11–14 (17*1) 41–53 (64*1)
Multi-layered with carbon 2 11–14 (17*1) 41–53 (64*1)
*1 Only for the last sheet
Note
•To insure optimum print quality, 60–82.5 g/m² (16–22 lbs.) is recommended for graphic printing.
•In multi-layered paper with carbon, the carbon is equivalent to a sheet of paper.
•"Weight in pounds" represents the weight of 500 [423 ´ 559 mm (17 ´ 22 in.)] sheets.
•The printer will handle multipart forms up to 0.36 mm (0.014 in.) thick. Up to 5 copies of 14 lbs. chemical
release paper can be used.

Single Sheets

Width: 102–297 mm (4–11.7 in.)
Height: 127–363 mm (5–14.3 in.)
Weight in pounds (g/m²): 53–90 g/m² (14–24 lbs)
Note
•Paper should be within operating temperature and humidity ranges at least 24 hours prior to use.
•Due to letter head varying in paper weight and construction, we cannot guarantee print quality and
paper handling for all types.

Envelopes

#6 and #10 size envelopes are recommended. Since envelopes vary in size, paper weight and construction,
we cannot guarantee print quality and paper handling for all types of envelopes.
Note
•To optimize print quality printing should not occur in areas where the edges overlap.
Operating Instructions 43
Appendix