Paper Out Detector
Your printer has a paper out detector. When an out of
paper condition occurs, printing stops, the printer goes
to the OFF LINE mode, and the POWER/PAPER OUT
indicator starts blinking. To continue printing to the end
of the current page, follow the steps below.
1. Press
ON LINE
repeatedly until the page is
completed.
2. Insert the new paper (Page 20).
3. If the ON LINE indicator is not lit, press
ON LINE
.
Note
•When Paper out detect is set to ON
(Page 34), printing stops at 1.26 mm (0.5 in.)
from the bottom of the paper.
•The paper out detector can be disabled through
the Control Panel Software program (Page 25).
32 Operating Instructions
Using the Control Panel