Panasonic KX-PRW130 operating instructions Baby monitor, Storing unwanted callers

Programming

When a call is received, the unit rings for a short time*1 while the caller is being identified. If the phone number matches an entry in the call block list, the unit emits no sound to the caller, and disconnects the call. (Caller ID subscribers only)

*1 This is called first ring. If you do not want the first ring to sound, turn this setting to “Off” (page 29).

Important:

RWhen the unit receives a call from a number that is stored in the call block list or a call without a recognized phone number, the call is logged in the caller list

(page 34) with after the call is disconnected.

Storing unwanted callers

You can store up to 100 phone numbers in the call block list.

Important:

RYou must store the phone number with an area code in the call block list.

nFrom the caller list:

1 MCN CID

2 MbN: Select the entry to be blocked. a MDetailN

R To edit the number: MMenuN a MbN: “Edit” a MSelectN Press MEditN repeatedly until the phone number is shown in the 10-digit format. And then, press MSaveN. Go to step 5.

3 MMenuN

4 MbN: “Save CID” a MSelectN

5 MbN: “Call block” a MSelectN

6 MbN: “Yes” a MSelectN

7 Edit the phone number if necessary

(24 digits max.).

8 MSaveN a MOFFN

nBy entering phone numbers:

1 MMenuN (right soft key) #217

2 MMenuN a MbN: “Add” a MSelectN

3Enter the phone number (24 digits max.).

4MSaveN a MOFFN

Blocking incoming calls without phone number

You can reject a call when no phone number is provided, such as a call just showing “Out

of area”.

1MMenuN (right soft key) #240

2MbN: Select the desired setting. a MSaveN

3 MOFFN

Setting the first ring for the call block list

If you do not want the first ring from a number on the call block list to sound, turn the first ring setting to “Off”. The default setting is “On”.

1MMenuN (right soft key) #173

2MbN: Select the desired setting. a MSaveN

3 MOFFN

Viewing/editing/erasing call block numbers

1MMenuN (right soft key) #217

2MbN: Select the desired entry. R To exit, press MOFFN.

3To edit a number:

MEditN a Edit the phone number. a MSaveN a MOFFN

To erase a number:

MEraseN a MbN: “Yes” a MSelectN a

MOFFN

Baby monitor

This feature allows you to listen in on a room where another handset is located, allowing you to easily monitor from different areas of the house or place. The monitored handset (placed in a baby’s room, for example) will automatically call the monitoring handset or

For assistance, please visit http://www.panasonic.com/help 29