Panasonic KX-PRW130 Smartphone Connect app, Simplified configuration WPS, Dhcp

Smartphone Integration

performing this procedure, and then change it back when finished.

3MbN: Select your wireless router’s SSID. a MSelectN

4Confirm the SSID and then press MOKN.

5Enter the password required to access the wireless network. a MOKN

R After the base unit connects to the wireless router, “Connected to” and your wireless router’s SSID is displayed.

6MOFFN

Simplified configuration (WPS, DHCP)

This procedure requires a wireless router that supports WPS. If your wireless router supports WPS, make sure the feature is turned on, and locate its WPS button before beginning this procedure. The WPS button is typically labeled “WPS” or has two curved arrows on it. Program this setting using either the base unit or one of the handsets. (Fewer operations are needed when using the base unit.)

Base unit

1Press the WPS button on your wireless router.

2Press and hold MWi-Fi SETUPN button on the base unit for about 5 seconds and then wait for a long beep to sound.

Handset

1MMenuN (right soft key) #523

2MbN: “WPS (Easy setting)” a MSelectN

3Press the WPS button on your wireless router and then press MOKN on the handset.

R The base unit searches for your wireless router and “Searching...” is displayed.

R After the wireless router is found, the base unit’s Wi-Fi settings will be completed automatically. When the setup is complete, “Connected to”

and your wireless router’s SSID are displayed.

4MOFFN

Advanced configuration (static IP settings)

After using the procedure explained in “Typical configuration (DHCP)”, page 43 or “Simplified configuration (WPS, DHCP)”, page 44, use the procedure below to set the base unit’s IP settings manually if necessary.

This procedure is not necessary for most users.

1MMenuN (right soft key) #500

2MbN: “Manual (Static)” a MSelectN

3 MbN: Select the desired item. a MSelectN

4Enter the desired setting. a MOKN R Press MFEN to move the cursor if

necessary.

5Set the other items as necessary.

6MbN: “<Save>” a MSelectN a MOFFN

Smartphone Connect app

Once you have configured the base unit’s Wi-Fi and network settings, you are ready to download the Smartphone Connect app. Download information is available at the web page listed below.

www.panasonic.net/pcc/support/tel/air

For information about using the app, refer to the Smartphone Connect App Guide, which is available for download at the web page listed above.

44For assistance, please visit http://www.panasonic.com/help