Panasonic KX-PRW130 Setting the baby monitor, To monitor from an outside line

Programming

the phone number stored when it detects	R When this feature is on, another handset
sound.		can hear the monitored handset by making
Important:		an intercom call.
R You should perform a test run of the baby
	To monitor from an outside line
monitor procedure to ensure that the baby
monitor feature is set correctly. For	n From the phonebook:
example, test its sensitivity. Check the		1 MMenuN (right soft key) #268
connection if you are diverting the baby	2		MbN: “On” a MSelectN
monitor to an outside line.
R This feature should not be used as a		3 MbN: Select “External” to monitor
substitute for a medical or caregiver’s			from an outside line. a MEditN a
supervision. It is the caregiver’s			MAddN
responsibility to stay close enough to	4		MbN: “Phonebook” a MSelectN
handle any eventuality.
Note:		5 MbN: Select the phonebook entry. a
R If the unit is connected to a PBX system,			MSelectN
		6 MbN: Select the desired phone number.
you cannot set the baby monitor.
R During the monitoring mode, battery			a MSaveN
consumption is faster than usual. We			R “Baby monitor” will be displayed.
recommend leaving the monitored handset		Note:
on the base unit or charger.		R If you edit a phonebook entry which is
R The monitored handset never rings during
			assigned for monitoring, the edited entry
the monitoring mode. But if the monitored
			does not transfer to the monitor.
handset is on the base unit, the base unit
ringer sounds. Turn off the base unit ringer	n By entering phone numbers:
volume to not sound the ringer (page 14).		1 MMenuN (right soft key) #268
	2		MbN: “On” a MSelectN
Setting the baby monitor
		3 MbN: Select “External” to monitor
Perform the setting operation with the handset
			from an outside line.		a M	N a
to be monitored (for example, the handset						Edit
			M	N
placed in a baby’s room).	4		Add
			MbN: “Manual” a MSelectN
		5 Enter the desired name. a MOKN
To monitor with a handset
		6 Enter the desired number. a MOKN
The internal baby monitor feature is only
			a MSelectN
available between handsets in the same radio
			R “Baby monitor” will be displayed.
cell.
	Note:
1 MMenuN (right soft key) #268
	R The registered name/number is displayed.
2 MbN: “On” a MSelectN
3 MbN: Select the desired handset number	Turning off the baby monitor
to monitor with. a MSaveN	The monitored handset cannot be used while
R “Baby monitor” will be displayed.
		baby monitor is set to “On”.
R The registered handset name/number
is displayed.		1 Press MMenuN on the handset being
Note:	2		monitored.
			MbN: “On/Off” a MSelectN
R You can also select your smartphone in this
feature using a handset, if your smartphone	3 MbN: “Off” a MSelectN a MOFFN
is registered to the base unit (page 43).

30For assistance, please visit http://www.panasonic.com/help