Panasonic KX-PRW130 Voice mail service, Storing the voice mail VM access number

Useful Information

Voice mail service

Voice mail is an automatic answering service offered by your service provider/telephone company. After you subscribe to this service, your service provider/telephone company’s voice mail system answers calls for you when you are unavailable to answer the phone or when your line is busy. Messages are recorded by your service provider/telephone company, not your telephone. Please contact your service provider/telephone company for details of this service.

Important:

RTo use the voice mail service provided by your service provider/telephone company rather than the unit’s answering system, turn off the answering system (page 36). For details, see page 41.

Storing the voice mail (VM) access number

In order to listen to your voice mail messages, you must dial your service provider/telephone company’s voice mail access number. Once you have stored your voice mail access number, you can dial it automatically

(page 46).

1MMenuN (right soft key) #331

2Enter your access number (24 digits max.). a MSaveN a MOFFN

Note:

RWhen storing your voice mail access number and your mailbox password, press MDN (Pause) to add pauses (page 14) between the access number and the password as necessary. Contact your service provider/telephone company for the required pause time.

Example:

1-222-333-4444 PPPP 8888

VM access	Pauses Password
number

To erase the voice mail access number

1MMenuN (right soft key) #331

2Press and hold MClearN until all digits are erased. a MSaveN a MOFFN

Voice mail (VM) tone detection

Your service provider/telephone company sends special signals (sometimes called “voice mail tones” or “stutter tones”) to the unit to let you know you have new voice mail messages. If you hear a series of dial tones followed by a continuous dial tone after you press MN, you have new voice mail messages. Soon after you hang up a call or after the phone stops ringing, your unit checks the phone line to see if new voice mail messages have been recorded.

Turn this feature off when:

–You do not subscribe to voice mail service.

–Your service provider/telephone company does not send voice mail tones.

–Your phone is connected to a PBX.

If you are not sure which setting is required, contact your service provider/telephone company.

Turning VM tone detection on/off

The default setting is “On”.

1MMenuN (right soft key) #332

2MbN: Select the desired setting. a MSaveN a MOFFN

Listening to voice mail messages

The unit lets you know that you have new voice mail messages in the following way:

–“New Voice Mail” is displayed if message indication service is available.

1MMenuN (right soft key) #330 R The speakerphone turns on.

2Follow the pre-recorded instructions.

3 When finished, press MOFFN.

46For assistance, please visit http://www.panasonic.com/help