Programming
memo can also be displayed for the schedule alarm.
Important:
RMake sure the unit’s date and time setting is correct (page 12).
Adding a new entry
1MMenuN (right soft key) a 
a MSelectN
2MbN: Select the desired date. a MSelectN
3MMenuN a MbN: “Add new entry” a MSelectN
4Edit the date if necessary. a MOKN
5 Set the desired time. a MOKN
6Enter a text memo (30 characters max.; page 17). a MOKN
7MbN: Select the desired alarm tone. a MSelectN 2 times
R You can select “Off” if you prefer not to hear an alarm tone.
R We recommend selecting a different ringer tone from the one used for outside calls.
8MOFFN
Note:
RTo stop the alarm, press MStopN or place the handset on the base unit or charger.
RWhen the handset is in use, the alarm will not sound until the handset is in standby mode.
Viewing entries
1MMenuN (right soft key) a 
a MSelectN
2To see the entries on the selected date, press MSelectN.
To see the schedule list, press MListN. R You can see detailed information about the schedule by pressing MMenuN. a MbN: “Detail” a
MSelectN
Editing an entry
1MMenuN (right soft key) a 
a MSelectN
2MListN a MbN: Select the desired entry.
3 MMenuN a MbN: “Edit” a MSelectN 4 Edit the date if necessary. a MOKN 5 Edit the time if necessary. a MOKN
6Edit the text memo if necessary (30 characters max.). a MOKN
7MbN: Select the desired alarm tone. a MSelectN 2 times a MOFFN
Erasing an entry
Schedule alarm entries are not erased automatically after the schedule alarm sounds. Erase unwanted entries.
1MMenuN (right soft key) a 
a MSelectN
2MListN a MbN: Select the desired entry.
3 MMenuN a MbN: “Erase” a MSelectN
4 MbN: “Yes” a MSelectN a MOFFN
Erasing all entries
1MMenuN (right soft key) a 
a MSelectN
2MListN a MMenuN
3MbN: “Erase all” a MSelectN
4 MbN: “Yes” a MSelectN
5 MbN: “Yes” a MSelectN a MOFFN
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to the base unit.
32For assistance, please visit http://www.panasonic.com/help
