Operating the hand scanner
Scanning a document
6 Press the hand scanner against the document, and move it slowly toward the direction of the arrow.
ストップ
1 Press down the handle of the hand scanner, and pull out the scanner from the main unit. Then, turn over the scanner to start scanning.
2 Press 
(Resolution) repeatedly to select the desired resolution.
●フツウ (Standard)
●チイサイ (Fine)
●シャシン (Photo)
3 Press 選択 (Select) repeatedly to select the scanning width.
●A4: within 208 mm
●B4: within 252 mm
4 Place the scanning position on the upper left side of the document.
Scanning position
5 Press 
(Start).
●When you hear a beep, you can start scanning.
Scanning
direction
7 After scanning is completed, press 
(Stop).
●You will hear a beep, and the scanned document is stored in memory of the main unit. Only 1 page can be scanned.
8 To print the scanned document or to send it by fax, see the next page.
●If you make a mistake, press 
(Stop) to erase the content of the memory, then start from step 2.
Important:
●When you have completed scanning, the scanned document in memory will be automatically erased after 10 minutes.
●To reinsert the hand scanner into the main unit, turn the scanner over, and insert it into the main unit firmly.
●When the hand scanner is out of the main unit, you cannot make a copy or send a fax.
14
