Panasonic KX-TCD410NL operating instructions Replacing the Batteries, Selecting the Battery Type

TCD410NL_E.book Page 6 Thursday, March 20, 2003 5:55 PM

Setting up

Symbols Used in This Operating Instructions

Symbol Meaning

To search the desired item, press UP or DOWN.

To select the desired item, press RIGHT.

To search and then to select the desired item, press UP or DOWN then

RIGHT.

To move the cursor to the right or to the left, press RIGHT or LEFT.

To go to the next step.

"" The words in " " indicate the words in display.

Replacing the Batteries

If the icon flashes after a few telephone calls even when the handset batteries have been fully charged, 2 batteries must be replaced.

Charge new batteries for approximately 7 hours before initial use.

(The telephone line cord must not be connected to the telephone socket at this time.)

When replacing the batteries, ensure that the correct battery type is selected.

Selecting the Battery Type

1	2	3	4
Press MENU.	Search/Select	Search/Select	Search/Select
	"SETTING HS".	"OTHER OPT".	"BATTERY TYPE".

5

Search/Select "NI-CD"or "NI-MH".

•To exit the operation, press any time.

•When Ni-Cd batteries are fitted with the "BATTERY TYPE" setting in "NI-MH", icon will disappear and stop charging even if the handset is on the cradle.

•Do not use non-rechargeable batteries. If non-rechargeable batteries are fitted and start charging, it may cause the leakage of the battery electrolyte.

Please use only Panasonic P03P(Ni-MH) or P03H(Ni-Cd) batteries.

6