Panasonic KX-TCD410NL Ringer Mode Selection Setting the All Handsets Mode, Number of Rings *3

TCD410NL_E.book Page 32 Thursday, March 20, 2003 5:55 PM

Multi-unit User Operation

Before programming, please follow steps 1 to 4.

1	2	"INPUT CODE"	3	1 4	4-digit
Press	Search/Select				Base Unit
					PIN*1
MENU.	"SETTING BS".
Ringer Mode Selection;
Setting the All Handsets Mode
5	1	6
"All handsets" mode.		Press OK.
Setting the Selected Handsets Mode
5	2	6 Handset Numbers*2	7
"Selected handsets"		Press desired		Press OK.
mode.		handset numbers.

Setting the Selected then All Handsets Mode

The specific handset(s) will ring for a selected number of rings.

If not answered, all handsets will ring.

5	3	6 Handset Numbers*2		7
	"Selected then all	Press desired		Press RIGHT.
	handsets" mode. handset numbers.
8 Number of Rings*3			9
	Select how many times		Press OK.
	it rings. (up to 6 rings)

•To exit the operation, press any time.

•The factory preset is in shade.

*1 The factory preset is 0000.

*2 The selected handset number flashes.

*3 Press dialling button 1 through 6 to enter the number of rings.

32