TCD410NL_E.book Page 34 Thursday, March 20, 2003 5:55 PM
Intercom
Intercom between Handsets
You can use your handsets as a
For example, when Handset 1 calls Handset 2. To hang up, press 
.
| <Handset 1> |
|
|
1 | INT | ( on the display) 2 | 2 |
| Press INTERCOM. |
| Press desired |
|
|
| Handset Number. |
<Handset 2> 
3
Press TALK.*1
•Intercom calls can be conducted within the radio cell of the current base unit, but not with units in neighbouring radio areas.
Transferring a Call to Another Handset/Conference Call
Intercom can be used during a call to transfer an external call between handsets that are registered to the same base unit. For example, when handset 1 transfers a call to Handset 2. To hang up, press 
.
<Handset 1> | 1 |
| ( | on the display) 2 | 2 | 4 3*3 |
(During a call) | INT | |||||
|
| Press INTERCOM. |
|
| Press desired | |
|
|
|
|
| Handset Number.*2 | |
|
|
|
| <Handset 2> | 3 | |
|
|
|
|
|
| Press TALK.*1 |
*1 You can also press any dialling button, INTERCOM, t or x.
*2 If you press 
after pressing desired handset number, a call can be transferred to another handset without speaking to another handset.
If the transferred call is not answered within 30 seconds, Handset 1 will ring again.
*3 When Handset 2 answers a call transferred, press 
to complete a call transfer or
press dialling button 3 to establish the conference call.
34
