Panasonic KX-TCD410NL Multi-unit User Operation, Handset Registration to a Base Unit

TCD410NL_E.book Page 30 Thursday, March 20, 2003 5:55 PM

Multi-unit User Operation

: Handset Registration to a Base Unit

Handset Registration

The handset supplied with the base unit is already registered. If an optional handset is purchased, it must be registered. Additional KX-A142EXhandsets are available to purchase separately. Up to 6 handsets can be registered to a single base unit. Using additional handsets allows you to have an intercom call while simultaneously conducting a call to an outside line.

Handset must be registered within 1 minute after pressing PAGE button. If over 1

minute, press then start over again.

Charge the optional handset batteries for 7 hours before initial use.

1		2		3	"REGISTER HS"
	Press MENU.		Search/Select		Search/Select
			"SETTING HS". "REGISTRATION".
4		5 Press and hold			on the Base Unit
	Press	(for about 10 seconds) until the green indicator flashes.
		If all registered handsets start ringing (Paging),
	RIGHT.
		press		to stop paging then start over again.

6 7 4-digit Base

Search/Select desired	Unit PIN after
	"BS PIN"	is
base unit number

available to register	displayed.*1
the handset.

8

Press OK.

When a handset is registered successfully, a confirmation tone sounds and "" icon lights.

•To exit the operation, press any time.

*1 The factory preset is 0000.

KX-A142EX Handset: You can see the illustrations for answering system feature on additional KX-A142EX handset body, but KX-TCD410NL does not have an answering system feature. Therefore, the answering system does not work even if KX-A142EX handset has been registered to KX-TCD410NL.

30