17
Telephone
Caller ID service
Important:
LThis unit is Caller ID compatible. To
display the caller’s phone number, you
must subscribe to Caller ID service. After
subscribing to Caller ID service, this unit
will display caller information.
How Caller ID is displayed
The unit will display the calling party’s phone
number after the first ring. You can view the
caller information of the last 50 different
callers.
When new calls have been received, the
display will show the number of new calls.
Example: 4 new calls have been received.
LThe number of new calls will be cleared
after viewing all caller information.
Note:
LWhen you receive a call from the same
phone number you stored with a name in
the phonebook, the display will show the
stored name.
LIf the unit is connected to a PBX system,
you may not receive the caller information.
LWhen the caller dialled from an area
which does not provide Caller ID service,
“OUT OF AREA” will be displayed.
LWhen the caller requested not to send
caller information, either no information or
“PRIVATE” will be displayed.
LThe display will not show caller
information while using the handset for an
intercom call. However, the caller
information will be stored.

Call waiting and Caller ID

compatible

If you subscribe to Caller ID service, your
handset displays the second caller’s
information while talking. After you hear a
call-waiting tone, the caller’s phone number
will be displayed.
You can answer the second call, keeping
the first call on hold. Follow Telstra or your
service provider instructions using {R}.
LIf the phone number is stored in the
phonebook with its name, the caller’s
name will also be displayed.
LPlease contact Telstra or your service
provider for details and availability in your
area.
Using Caller ID type II
When you receive a second call during a
conversation, you will hear a signal tone
following the call waiting tone and the
conversation will be interrupted or
muted for a short period of time. This is
not the fault of the product as these events
are normal.
Note:
LThe tones are generated by the service
provider.

Viewing caller information and

calling back

The unit will automatically store the phone
numbers of the last 50 different callers from
the most recent call to the oldest. When the
51st call is received, the oldest caller
information will be automatically erased.
You can easily view caller information and
use it to make calls.
1Press {v}.
2Press {v} repeatedly to search from the
most recent caller information.