Press {6}.
Enter “0000” (default base unit PIN).
L If you changed PIN, enter it (page 24). L All the registered handset numbers will
3
4
Press {j}.
Press {v} repeatedly to display “SETTING BS”, then press {>}.
1
2
Setting call restriction
You can restrict selected handsets from dialling certain phone numbers. You can assign up to 10 phone numbers (memory locations 1–10) to be restricted per handset. If a restricted number is dialled, the call will not be connected and the restricted number will flash on the display. For example, storing an area code will prevent a handset from dialling a long distance call.
Press {>}, then press {ih}.
7
L If you changed PIN, enter it (page 24).
5 Press {3}.
6 Select the desired setting by pressing {1} for 3 seconds or {2} for 5 seconds.
Press {3}.
Enter “0000” (default base unit PIN).
3
4
Setting pause length
1 Press {j}.
2 Press {v} repeatedly to display “SETTING BS”, then press {>}.
Press {>}, then press {ih}.
8
Press {1}.
Press {2}.
5
6
7 Select the desired setting by pressing {1} for 700 ms or {2} for 100 ms.
Press {3}.
Enter “0000” (default base unit PIN).
L If you changed PIN, enter it (page 24).
3
4
“SETTING BS”, then press {>}.
TCD440_445AL(E).book
Page 25 Monday, May 24, 2004 1:17 PM
Useful Telephone Settings
be displayed.
L Flashing numbers indicate call restriction is turned on for the corresponding handset.
5Press the desired handset numbers.
L The selected handset numbers will flash.
L To cancel a selected handset number, press the number again. The number will stop flashing.
6Press {>}.
7Enter the phone number to be restricted (8 digits max.).
L If you enter a number when a previously stored number is already displayed, the new number will erase the old number.
L To select a different memory location, press {>} repeatedly and enter a number.
8Press {>}.
9Press {ih}.
Turning on/off call restriction
1Press {j}.
2Press {v} repeatedly to display “SETTING BS”, then press {>}.
3Press {6}.
4Enter “0000” (default base unit PIN).
L If you changed PIN, enter it (page 24).
L Handset numbers will be displayed. Flashing numbers indicate call restriction is on; non-flashing numbers indicate call restriction is off.
5Press the desired handset numbers to turn on/off.
6Press {>}, then press {ih}.
Cancelling a restricted number
1Press {j}.
2Press {v} repeatedly to display
