TCD440_445AL(E).book Page 34 Monday, May 24, 2004 1:17 PM
Setting all or selected handsets to ring
You can select one of 3 methods to determine how the handsets ring for incoming calls.
−“1”: All handsets will ring.
−“2”: Selected handset(s) will ring.
−“3”: Selected handset(s) will ring, then all handsets will ring.
Setting all handsets to ring
1Press {j}.
2Press {v} repeatedly to display “SETTING BS”, then press {>}.
3Press {1}.
4Enter “0000” (default base unit PIN).
L If you changed PIN, enter it (page 24).
5Press {1} to select “1”.
6Press {>}, then press {ih}.
Setting the selected handset(s) to ring
1Press {j}.
2Press {v} repeatedly to display “SETTING BS”, then press {>}.
3Press {1}.
4Enter “0000” (default base unit PIN).
L If you changed PIN, enter it (page 24).
5Press {2} to select “2”.
L All registered handset numbers will be displayed and the
6Press the desired handset number(s).
L The selected handset number(s) will flash.
L To cancel a selected handset number, press the number again. The number will stop flashing.
7Press {>}, then press {ih}.
Setting the selected handset(s) to ring before all handsets ring
1Press {j}.
2Press {v} repeatedly to display “SETTING BS”, then press {>}.
3Press {1}.
4Enter “0000” (default base unit PIN).
L If you changed PIN, enter it (page 24).
5Press {3} to select “3”.
L All registered handset numbers will be displayed and the
6Press the desired handset number(s).
L The selected handset number(s) will flash.
L To cancel a selected handset number, press the number again. The number will stop flashing.
7Press {>}.
8Press a dial key from {1} to {6} to select the number of rings before all handsets ring.
L The selected number of rings will be shown on the right edge of the display.
9Press {>}, then press {ih}.
34
